Bose Soundlink Won’t Turn On: Resolve It With This Guide

Are you the one experiencing won’t turn on problems with your latest Bose soundlink speakers while having a perfect audio adventure with your friends across the pool or patio?

Don’t worry, and you are not alone. There can be several reasons why your boss’s soundlink is not turning on, including a poor power outlet, bad AC adapter, poor circuit connections, or it may require a reboot. Find out the simplest and most effective troubleshooting process by following the complete Bose soundlink won’t turn on the guide below.

Bose soundlink main problems and solutions

Sometimes, Bose soundlink won’t turn on or does not respond even when you connect it to a strong power supplier. It is a very common issue that most users face. Now acknowledge the following Bose soundlink main problems and solutions to get the potential outcomes from this product.

The Bose soundlink won’t turn on unless plugged in

Your Bose soundlink won’t turn on even if you are plugged into an AC power Adapter. There can be various causes of a certain problem like maybe your power adapter itself is not getting power from the main circuit. Try any other power outlet to turn on your Bose soundlink speakers.

If it still does not work, check the circuit board and other connections because if there’s any defect, your mini speaker will not turn on. So, ensure proper working of a circuit board and other connectors.

Or sometimes, your device requires a reset process to turn it on, so follow the three steps below to reboot your boss soundlink;

Plug in the speaker.
Press the mute button for a few seconds and wait until the LED lights flash on the top of the speaker.
Now press the power button to turn on your mini speaker.

The Bose soundlink is not working

Bose soundlink is not working due to the low or zero charging of the battery. So, charge it too fully to power on your speaker. Further, mini speakers stop connecting to the nearby Bluetooth device when they don’t work. You can resolve it by following the steps;

Turn off and on your Bluetooth device to restart a search for the closest Bluetooth speakers.
If still, your speaker is not showing in the list, then open the Bluetooth setting of your device and search for an option to scan your mini speakers
Then after you find out your speaker’s name, select it immediately.

The Bose soundlink is not charging

Bose soundlink often doesn’t charge when plugging in the AC power adapter. It can be due to the faulty charging dock. Most speakers charge directly from the power port on its side or via the charging dock. Here is the solution to troubleshoot these charging problems of a speaker;

Unplug from the charging dock and reconnect to ensure they are firmly connected.

Try a new charging dock to fix this issue, then plug it into the AC power adapter on one side of the speaker. Now see if it is charging by powering it up.
Ensure that the connecting power outlet is working. You’ll hear a vibration if plugging properly.
Monitor that your USB charger meets all your mini speaker’s power requirements.
If the problem persists, turn on the speaker’s ship mode and charge it for at least one hour.
Further, you can also restart your device to fix it.

The Bose soundlink is not responding

Bose soundlink often fails to respond and won’t turn on for several reasons. Here’s a highly effective solution to remedy this error;

Firstly, ensure that the power outlet is working; if not, it will not charge to turn on. So, if you do not hear any tone after plugging, it is faulty; replace it with the new one.
Check if the charging cable is faulty, it won’t turn on. So try any other cable or USB cable to charge it properly.
Install all the available updated software.

The battery is damaged

If the battery you use in your Bose soundlink is damaged, switch it to the new one immediately. But how to replace the battery of Bose Soundlink? Here’s the answer below;

Steps to remove the battery from Bose soundlink.

Firstly remove the two screws at the downside of the battery by using a 2.5 mm hex wrench.

Move up on the back of the cover when it slides up

Move the cover-up away from the Bose soundlink speaker’s back.

Remove the screws near the bottom side of the speaker to protect the battery.

Extract the battery straight out of the speaker.

Steps to attach a new battery in Bose soundlink

Restore the screws in the battery and tighten it by using a 2.5 mm hex wrench.

Place holes inside the cover on the back side of the speaker with an anchor post and push the body into the place.

Move the cover down on the anchor screws until it ceases

Restore and tighten the screws with a 2.5 mm hex wrench at the bottom of the body.

The color is not turning on

If the Bose soundlink color is not turning on, it can point to several problems, including fault charger and power outlet, battery issues or outdated firmware. Let’s fix this glitch by following the steps below;

Firstly, ensure that the power outlet is working; if not, it will not charge to turn on. So, if you do not hear any tone after plugging, it is faulty; replace it with the new one.
Check if the charging cable is faulty, it won’t turn on. So try any other cable or USB cable to charge it properly.
Install all the available updated software.
Lastly, enable ship mode by implementing the steps below;
Connect the Bose soundlink to a charger.

Press and hold the play pause button for 10-15 seconds, then unplug the speaker from the charger while maintaining the buttons.

Now release the buttons to turn on ship mode

It’s not power on

Follow these steps to power on your Bose soundlink;

Unplug from the charging dock and reconnect to ensure they are firmly connected.
Try a new charging dock to fix this issue, then plug it into an AC power adapter on one side of the speaker. Now see if it is charging by powering it up.
Check the USB charger meets all the power requirements of your mini speaker.
If the problem persists, turn on the speaker’s ship mode and charge it for at least one hour.
Further, you can also restart your device to fix it.

The remote is not working.

Suppose your Boss soundlink is not controlled by the remote or only sometimes it responds to the remote. In that case, there may be some issues, including any object blocking the front of your speakers, low battery usage in remote or any outdated speaker’s software.

Try the following step to fix it;

Check if anything is blocking the remote sensor on Bose soundlink; remove it instantly to resolve the issue.
Make sure batteries in your remote are not low-powered; if these are, replace them with new alkaline batteries.
Ensure that you are using a remote within the range of 20 feet.
Test to see if the remote’s buttons are working properly.
But if the problem still occurs, reset your Bose soundlink to fix this problem.

Reset

Sometimes, your device requires a reset process to reset back to default setting, so follow the steps below to reboot your Bose soundlink;

Press the mute button for 10 seconds until the LED lights flash on the top of the speaker.

Now press the power button to turn on your mini speaker.

Bose soundlink II won’t turn on

Bose soundlink II also often won’t turn on, even connected to the battery. To troubleshoot this problem, follow the solution guide given below;

Battery Protection Mode Active

Some Bose soundlink speakers automatically enable Battery Protection Mode if not used or charged in 14 days.

To fix this problem, you must connect your speaker to an AC power outlet. But ensure that the power outlet is not broken or getting the adequate power supply.

The battery is damaged or not charged

Charge your battery to the fullest (100%) before unplugging it from an AC power adapter. It will make your battery fully charged for achieving proper functioning. Further, ensure that the battery is not damaged; otherwise, replace it with the new on

Incorrect connection to a power source

You have connected your speaker to the power outlet, but still, Bose soundlink II won’t turn on. Don’t panic; try to fix it by adopting the steps below;

See to test if the power cable is correctly plugged into the outlet. If the Bose soundlink II is connected to the surge protector, double-check their connection.
Ensure the proper functioning of the power outlet as often the outlet is not installed effectively and causes damage to the device.
Check the breaker for an adequate power supply.
Analyze outlet test buttons to confirm the power outlet is working.

Damaged or broken charger

If the problem persists, check the charger is not broken or damaged. Try a new charger cable or power cord if this is the case.

Bose SoundLink Mini II Is Not Charging

If your Bose SoundLink Mini II is not charging, it will not be able to turn on. The charging issue can occur due to different reasons. One common issue that can cause your SoundLink to not charge is its built-in “Battery Protection Mode.”

The Battery Protection feature turns your if your device is not plugged in the last 14 days to an AC power. To disable this feature, connect the SoundLink with an AC power and turn on the device. If the issue still presits try charging a device with a different charger.

Facing the same issue? Try rebooting its internal processor. Here is how you can do it:

Turn your SoundLink Mini to Ship Mode. To active, this mode, plug in the charger in SoundLink and press and hold the Multifunction Button (The Three Doted Button) for 10 seconds.
Display lights of the SoundLink will start blinking; keep pressing the Multifunction Button.
Plug out the charger from the device and release the Multifunction Button after a few seconds until the speaker turns off.
Plug the charger back into the SoundLink and let it charge for at least 1 hour.
The Ship Mode does not delete any settings of your SoundLink.

Bose SoundLink Flashing Red Light

If your Bose SoundLink is blinking red light when you try to charge it after some time, you are not the only one facing this issue. Bose SoundLink battery was designed to go into auto sleep if left uncharged for quite some time.

However, this feature in some devices can lead to the battery not charging, no matter how long you put the SoundLink plugged in. If you are facing the issue of a flashing red light on SoundLink, here is how you can fix it.

Go to https://btu.bose.com/#section=install to download the software updater.
Use a USB charging cable to connect SoundLink to your PC.
Now go to btu.bose.com and wait till the device connects with your PC.
If it shows that you have the latest software installed, you need to go to Advance mode.
To Enter Advance Mode, Press the Keys in order on your Keyboard: A > D > V > UP Arrow > Down Arrow
Different versions of your SoundLink device will appear.
Either reinstall the current version or a previous one.
The installation will now begin. The red light will turn orange, and the device will beep a few times before turning off.
Let your SoundLink device charge for a few hours, and your device is good to go.

Conclusion

So, here we try to provide you with each possible solution if your Bose soundlink won’t turn on. Check your power outlet, speaker’s battery, charger cable and other connectors for proper functioning. But if the problems still stay, reset your device to troubleshoot these minor issues. Hope you find it helpful if you are fixing your Bose soundlink issues.

If you need further help please let us know, our team of experts will be glad to answers all your questions.

FAQs

Why is Bose SoundLink not responding?

There can be several reasons why your boss’ soundlink is not responding including poor power outlet, bad AC adapter, poor circuit connections, weak Bluetooth connection, or it may require a reboot.

Why is Bose SoundLink not charging?

Bose soundlink often doesn’t charge when plugging in the AC power adapter. It can be due to the faulty charging dock.

Why does Bose soundlink keep on switching?

There can be several reasons your Boss soundlink keeps switching, including poor power outlet, bad AC adapter, and poor circuit connections, or it may require a reset process.

Why is Bose soundlink lighting up?

Often Bose soundlink lights up red or white light to indicate low charging or point to a defective battery, charger cord or software.

How to replace the Bose soundlink battery?

Steps to remove the battery from Bose soundlink:

– Firstly remove the two screws at the downside of the battery by using a 2.5 mm hex wrench.
– Move up on the back of the cover when it slides up
– Move the cover-up away from the Bose soundlink speaker’s back.
– Remove the screws near the bottom side of the speaker to protect the battery.
– Extract the battery straight out of the speaker.

Steps to attach a new battery in Bose soundlink

– Restore the screws in the battery and tighten it by using a 2.5 mm hex wrench.
– Place holes inside the cover on the back side of the speaker with anchor posts and push the body into the place.
– Move the cover down on the anchor screws until it ceases
– Restore and tighten the screws with a 2.5 mm hex wrench at the bottom of the body.

How to fix Bose soundlink?

Check your power outlet, speaker’s battery, charger cable and other connectors for proper functioning. But if the problems still stay, reset your device to troubleshoot these minor issues.