There’s no doubt that Sony is in the upper echelon of quality electronics manufacturers, but that doesn’t mean that you won’t ever have trouble with one of their products. Try these quick fixes if you find that your Sony TV won’t power on.
Sony TV Won’t Turn On (You Should Try This Fix FIRST)
You grab some popcorn and snuggle into the couch to binge-watch your favorite TV show, and you push the power button on the remote to see — nothing. Why is my Sony TV not getting power, you wonder.
Don’t fret just yet; several things could be happening, and it may be an easy fix. Consider the following issues:
It’s Not Plugged in Properly
Of all the reasons the Sony TV won’t power on, this is one of the most common.
Ensure that the AC power cord is plugged in correctly to a wall outlet you’re sure works.
You can verify that it works by plugging in another device and seeing if it turns on or not.
If you used a surge protector or a power strip, unplug the TV, and plug it into the wall outlet directly. If your Sony TV turns on, it was the power strip, and you just need to replace it.
Check that the power cord in the back of the television is secure and that all of the other wires to the TV. It’s easy for the HDMI connections or the converters to get loose from moving the TV around from time to time. Note: Ignore this step if the power cord isn’t removable.
There’s a System Error
Does it seem like all is well with the outlets, but your Sony TV won’t power on STILL?
Well, the Sony TV not working could be due to an internal issue and why your Sony Bravia TV won’t power on no matter what you’ve tried.
Usually, an LED light starts blinking eight times on a loop until you disconnect the television. The light is typically red, and you can unplug your TV and reset the power in this situation. Disconnect the television and leave it for two minutes as you push the Sony TV power button.
You’re draining power from the device’s capacitors, which will eventually cause a complete reset of the television.
The Remote Isn’t Working
Sometimes you wonder, “why won’t my TV turn on but has power?” It may be a quick fix with the remote. Check the batteries and if the TV still isn’t working by using the remote, try using the television’s power button if you think it’s an issue with the remote.
If the TV starts working, you should replace the remote, ensuring it’s compatible with your device model.
There’s a Firmware Update
If your Sony TV is in the middle of updating the firmware, it won’t be responsive at the time. An orange blinking LED light indicates that your television is receiving an update.
Wait until it’s finished, and ensure you don’t disconnect the television while this is happening.
The Energy Saving Switch Is Turned Off
Is your Sony Bravia screen not turning on? Check the energy-saving switch. Upgraded models from the Sony brand now come with this switch at the back on the right side.
This feature reduces power consumption, and the television is designed not to turn on if the switch isn’t activated. A quick button flip should resolve the problem if someone accidentally turns it off.
Your TV Is Overheating
Another reason your Sony TV won’t power on is from overheating. The built-in red LED light will blink eight times when you try to use the TV. Here’s how to verify that air is circulating correctly:
- Turn off the television.
- Grab a compressed air can that has an attached nozzle to clear dust from places that are hard to access without damaging the internal components.
- Turn the television toward you so you can see it clearly to access the air vents.
- Put the can over the air vents but don’t insert the nozzle into the ducts. You start to see dust emerging if this was the problem.
- Continue this strategy until you don’t see any more dust.
- Turn on the television.
Your TV Is on the Wrong Input Source
If your Sony TV is not on the proper input source, it may appear that it is not turning on. Be sure that you selected the appropriate input source for the television.
Below are two methods that you can use to fix the input source with or without your remote.
Method 1 — Enable Input Source Using a Remote Control
This method is the easier way to answer the question of why it won’t my TV turn on but has power while using your remote.
- Turn on the television.
- Locate and push the Source button on your controller.
- Choose the correct input.
Method 2 — Change Input Source Without Remote Control
Here’s how to turn on Sony TV without a remote.
- Turn on the television.
- Push the Menu button on the bottom or side of your television.
- Scroll to the options where you can change the source using the button that changes the volume.
- Now press the menu button again to select the correct input.
Sony TV Not Turning On Blinking Red Light
If the Sony TV is not turning on, but a red light is blinking, your TV has detected a problem. In most cases of a blinking red LED, the current state of the TV requires repair.
The meaning of the blink codes can signify different things depending on the TV model. However, the following steps may help to resolve fixable errors such as temporary conditions and software updates.
Sony TV Turns on Then off Immediately
Your drivers may have to be updated for an older Sony TV model. Additionally, the TV could be corrupted, which is why it would turn off immediately after turning on your TV.
However, if the issue is the TV driver, you must reinstall or update it; this requires you to go to the manufacturer’s website and download the newest driver for your specific TV model.
After downloading the driver, install it onto your computer and connect your television to your computer via a USB cable. Once you’ve installed the latest driver, try turning on your Sony TV again.
Sony TV Won’t Turn on After Power Outage
How do I reset my Sony TV after a power surge?
The first thing to do in the event of a power outage is to implement a power drain cycle on your television. Begin by disconnecting your TV from the electrical outlet.
Press and hold the power button for 10–30 seconds to drain any remaining power from your Sony TV. Then, plug the TV back up to the power source and attempt to turn it on.
Is there a fuse in a Sony TV?
If you have a Bravia TV, and you see a gap between the wires, or it looks like a dark smear inside the glass screen, you have a blown a fuse. There’s a power board linked to fuses with this model. You may need to start searching for a Sony Bravia fuse replacement.
Sony TV Won’t Turn On, Just Clicks
If your Sony TV won’t power on and continues to click, try out an electrical reset first. Disconnect the TV from the power source for two minutes.
If there’s no success with the electrical reset, turn on your television as you would normally. However, this time as soon as you hear the clicking sound, press and hold the power button on your controller until you see the picture emerge. Try this for a few minutes. If this fails — try resetting the remote.
Main Power Button on Sony Remote Won’t Turn TV On
Reset the remote control by removing the batteries. Press each button on the controller two times to discharge the power. Then, replace the old batteries with new ones.
What is the Lifespan of a Sony TV?
A typical television should last up to ten years, depending on the model and how often you use it. Sony TVs are no exception to this trend, so expect a similar lifespan for your TV.
On the other hand, if your TV won’t turn on and it’s more than six years old, you should consider buying a newer model.
When To Get Your Sony TV Serviced?
If none of the solutions on this list worked for you and it still won’t turn on, consider getting your TV serviced. Here’s what you can do.
See if the warranty on your TV applies. Call customer service and tell Sony what happens to your TV when you try turning it on.
Schedule a service appointment for your TV. If the warranty doesn’t apply in your situation, you can take your TV to a nearby repair shop. But, if the television is too old, it’s better to cut your losses and get a new one.
Luckily, when it comes to a TV that won’t turn on, there’s usually a solution to get your device back up and running. Hopefully, this guide has provided you with all the necessary troubleshooting steps to get your TV up and running again.
Frequently Asked Questions
There are a few reasons for the unresponsiveness:
1. Cords are not secured
2. Internal issue
3. Faulty remote
4. System update
Always start with the power cords and outlets, and work your way to completing a power reset.
Your Sony TV won’t power on? Perform a power reset by pressing and holding the power button until the TV turns. Hold it again until it displays a restart option. Push restart and see if this gets the TV working again. If not, you might have to try a factory reset.
There’s no specific button to reset the TV, but for those who want to know how to turn on a Sony TV without a remote, hold the volume down button and power button simultaneously.
Have someone plug the television in while you’re doing this. Continue holding the buttons until you see a green LED light near the Sony logo on the front of the TV.