What you find on this page:
GE has been producing appliances since 1892. Moreover, they are reliable and durable. Among their products are refrigerators, freezers, washing machines, dryers, dishwashers, and ovens.
If you have a GE dishwasher that isn’t starting, you might be wondering where to start looking for a solution. This article will help you find the answer to your GE dishwasher troubleshooting not starting problem.
Common Causes And Fixes for a GE Dishwasher Not Starting
There are many possible reasons why your GE dishwasher may not start correctly. Here are 10 of the most common problems and solutions:
1. Dishwasher Not Getting Power
The first thing to check if your dishwasher won’t turn on is whether there is any electricity coming into the plug socket. Next, check the fuse box and make sure that the fuse is not blown. Also, check that the circuit breaker is turned off.
Ensure the dishwasher is plugged in correctly. Make sure the plug is securely connected to the wall outlet.
Check whether enough power is reaching the appliance when trying to fix a GE dishwasher not starting. You should always use a qualified electrician if you need to replace any parts on your appliance.
2. Problem With The Water Supply
Another possibility is that there is no water pressure available to the dishwasher. It could happen because of a blocked pipe or a damaged main valve.
To test this, check the dishwasher and see if you get any water flowing from the water supply hose. If water runs through the pipes, there will likely be sufficient pressure to run the dishwasher.
Also, check for any kinks or damage to the water supply hoses. These can cause problems such as leaks or blockages.
If the supply valve and hoses appear fine, but nothing happens, then it’s time to call a plumber.
3. Incorrect Dishwasher Cycle Settings
It’s essential to set up the correct cycle settings before using the dishwasher. Follow instructions carefully and ensure that the controls are set correctly.
Some features, like the child lock setting, or delay start, can prevent an immediate start but check your control panel display codes first to see if they’re enabled. If so, hold down the Start button for three seconds to turn them off. GE Profile dishwasher troubleshooting control panel can solve many problems.
4. Dishwasher Door Isn’t Latched Shut
If your dishwasher isn’t working correctly, start by checking the door latch. If the latch is broken, the dishwasher will not turn on. You’ll need to replace the latch.
If the latch works fine, then check the door switch. If the switch doesn’t work, the dishwasher won’t turn on. You’ll have to call an appliance repair technician to fix the problem.
5. Faulty Wiring
Faulty wiring could also cause your GE dishwasher not to start. Check the wires and connections to see if they look worn or frayed.
Under the junction box cover, you can find the power wire. Repairing these issues will usually require replacing the entire cable assembly. A faulty circuit breaker could also cause your dishwasher to stop working.
6. Touchpad Not Working
Press different buttons on the touchpad to determine if it is working. You should replace the touchpad if it’s been damaged or unresponsive. It may be possible to repair the unit, but only with some experience. If none of them work, contact a local repair company.
7. Timer
The GE dishwasher timer sends power to the dishwasher at intervals, allowing it to start up properly. However, if the timer is faulty, it might not send power to these areas, which could interrupt its start-up.
Set your ohmmeter to x 1000 to test the timer. Touch each probe to one wire. Most dishwashers read between 2000 and 3500 ohms.
Look in the owner’s manual for a schematic. For your specific timer motor, this schematic should indicate the resistance reading. You should replace your timer motor or timer assembly if your reading from testing your timer’s motor differs greatly from these ranges.
8. Faulty Drive Motor
The motor is responsible for circulating the water and keeps everything inside nice and clean.
If you hear a loud humming from your GE Dishwasher, this could point to motor damage that needs replacement. You can also use a volt to check whether the driver motor is spinning. The motor is good if it spins slowly. The motor may be damaged if this is not the case.
9. Check the selector switch
The selector switch on your dishwasher is the part that gives you different options when it comes to drying and washing. Find out if a licensed replacement part is available if the selector switch is not working. Try replacing it with an official branded part if one is unavailable.
10. Assess the thermal fuse
Thermal fuses are designed to protect against high temperatures within the dishwasher. They’re located near the heating element and are often very small. If the fuse fails, it could lead to overheating and eventual failure of the dishwasher.
Troubleshoot the fuse by removing it and testing it using a multimeter. If the reading indicates that it’s blown, replace it immediately.
Other GE dishwasher issues
GE dishwasher not starting beeps 3 times
The 3 beeps mean that your dishwasher thinks the door is open, and it won’t run. So you should properly close the door. If the dishwasher doesn’t start a few seconds after this, it may be because of a faulty power cable. Try turning off the power to the dishwasher and wait a few minutes before turning it back on.
If the dishwasher starts but immediately stops, this may be due to a malfunction in one of the dishwasher’s electronic controls. In this case, you will need to call GE customer service for help.
If the GE dishwasher won’t start just beeps; power surges can be the cause behind it. Resetting will usually solve the issue. Also, if dishwasher lights are flashing and will not start can be solved with a reset.
GE dishwasher not starting light blinking
When a door to the dishwasher is not closed, it can produce a light blinking that can be resolved with a reset. Resetting can get the dishwasher up and running without needing to call in an engineer.
For 2 minutes, try pressing the “Start/Reset” pad on the dishwasher to reset the dishwasher. If the problem persists, press (turn off the power) the circuit breaker or fuse box at the main panel and restart again for 30 seconds.
GE dishwasher won’t start but has power
Make sure the power is turned on and that the water is running. If those things are working, try checking the door status light. If it’s on, something may block the door from closing correctly.
- Be sure that the power switch is on.
- The power switch may be located under a sink or near the dishwasher.
- Check your home’s circuit breaker or fuse box to fix any tripped breakers or blown fuses.
- Re-position any tripped breakers or replace blown fuses if applicable.
Dishwasher running but no water
When you hear the dishwasher running but no water coming out of the pump, the timer or electronic control mechanisms may be to blame.
There could also be a faulty water inlet valve, a malfunctioning float switch, a broken door switch, a broken drain solenoid, or a damaged water supply line.
Dishwashers that don’t get water aren’t always easy to diagnose. In most cases, it’s recommended to have a professional look at it.
Ge dishwasher buttons not working
If your GE dishwasher buttons don’t work, here are some possible fixes:
1. Check if the dishwasher is plugged in and turned on.
2. Check if water runs through the dishwasher and into the drain.
3. Check to see if the dishwasher’s display is working.
4. If some touchpad buttons do not work, this might be a problem with the touchpad component.
4. Try resetting the dishwasher.
5. If none of these solutions work, you may need to call a professional to diagnose and repair the dishwasher.
Conclusion
Many things can go wrong with your dishwasher. However, if you follow the above steps, you’ll have a better chance of fixing your problem quickly and easily.
FAQS
Check for loose connections, bad wiring, or short circuits if your dishwasher isn’t starting. Also, try turning off the power switch at the breaker panel.
– Make sure that the drain hose is clear of debris.
– If it’s been running for a while, check the filter.
– Make sure that the door seal isn’t broken.
If these don’t work, call a professional to repair your dishwasher.
The dishwasher needs to be reset when it stops working correctly. Resetting will also make the dishwasher run more efficiently. The dishwasher uses water to clean, it will get dirty over time and accumulate spots or stains. Avoid soaps that leave a film or residue on your dishes. Remember not to overload your dishwasher when washing dishes. It ensures there is enough water in the machine.
A dishwasher needs to be reset once a year. A dirty sensor could cause the machine to shut down, detecting food on the plates. Follow the instructions properly before resetting your dishwasher after running for an extended period.
The GE dishwasher can’t start if certain conditions are not met. For example, if there is no power to the dishwasher, faulty wire, timer, touchpad, driver motor, door latch, thermal fuse, connector switch, the fuse is wrong, or there has been a tripped breaker, the dishwasher will not automatically start. Also, the dishwasher won’t turn on if the water valve on your washer is shut off.
Check for water leaks around the drain hose if the dishwasher doesn’t start the wash cycle. Also, check the faucet valve to ensure it isn’t stuck open. Contact a local appliance repair service if these checks don’t resolve the issue.
GE dishwashers require a button to be pressed during a cycle. If you have a top-loading dishwasher, open the top and press the reset button. Then, wait 2 minutes before opening the door to add any dishes. When you see the machine blinking, a reset is taking place. Wait for the light to stop blinking, and then begin your test.
Yes, a GE dishwasher does have a fuse. The fuse box is located beside the heater element.
